万人炸金花

Welcome to the official website of Ningbo Asahi Hydraulic Co., Ltd.!
13736056877 Consulting Tel: 13736056877
0574-88850227

Hot products

  • Bladder accumulator
    The NXQ series national standard capsule accumulator is a capsule-type accumulator produced by Asahi Hydraulics. Because of its outstanding characteristics in saving energy, stabilizing pressure, reducing energy consumption, and compensating for leakage, it is Widely used in automotive, mechanical machine tools, petroleum, aerospace and other industries. Capsule accumulators mainly use the compressibility principle of gas (generally nitrogen) to accumulate energy ...
  • Piston accumulator
    Piston type accumulator is a kind of hydraulic isolation type accumulator. It is an important auxiliary component in hydraulic system. It plays a very significant role in auxiliary power, absorbing pulsation, reducing noise, emergency power source, and absorbing hydraulic shock. The working principle of the piston accumulator is the same as the liquid-gas isolated accumulator, which mainly uses the compressibility of gas and liquid. When the air pressure is high, the pressure of the liquid is converted to gas ...
  • Diaphragm accumulator
    Diaphragm accumulator is a kind of energy storage device in hydraulic pneumatic system. Compared with similar products, the biggest feature of diaphragm accumulators is that they are easier to carry, easy to install and popularize, have high sensitivity, large effect, simple structure and easy maintenance, and have a significant effect of eliminating low-pulsation. Roles. Diaphragm accumulators can generally be divided into two types: welding type and screw type. Which welding type ...
  • Working principle of accumulator
    The accumulator is a hydraulic accessory designed to accumulate pressurized liquid. The liquid is incompressible. The accumulator uses the compressibility of gas to achieve the purpose of storing liquid. When the pressure increases, the oil enters the energy storage The gas is compressed by the device. When the pressure drops, the compressed gas expands, and the oil hydraulic pressure enters the circuit ...
  • Accumulator use
    The functions of energy storage devices are as follows: 1. Energy storage devices are widely used in auxiliary energy. On the one hand, the hydraulic oil output intermittently by the pump is stored, and on the other hand, the fluid that is greater than the pump flow rate is released to the intermittent load. Therefore, the presence of an accumulator enables miniaturization and energy saving of pumps and the like. Second, suck ...
  • American ASME Accumulator
    American ASME Standard Accumulator 1. Model Description BA (TA) – ※ / ※ – ※ – ※ Structure: Removable accumulator at the bottom: BA Accumulator at the top: TA1, TA2 Volume: 0.15 ~ 15gal Maximum working Pressure: 3000PSI ~ 5000PSI Connection: T—thread connection, F—flange connection ...
  • EU CE accumulator
    EU CE standard accumulator 1. Model description (CE: PED refers to this) NXQ □-□ / □-□-□ ① ②③ ④⑤⑥ ① Capsule accumulator ② Structural form: A: small mouth; AB: large mouth ③ nominal volume : Liter ④ Nominal pressure: MPa 10 ~ 31.5MPa ...
  • Non-isolated accumulator
    1. Product Overview The gas storage tank stores energy by means of gas storage. As a gas power source, or as a non-isolated accumulator, the gas is in direct contact with the liquid, and plays a role in energy storage, compensation for hydraulic loss, and stable pressure in hydraulic and pneumatic systems. The purpose is to increase oil discharge capacity and reduce pump down Group power. Non-isolated accumulators have large capacity, low functional loss, energy saving, and ...
  • Nitrogen-charged car (nitrogen booster)
    CDZ-Y nitrogen-filled car (nitrogen pressurization device) is composed of a hydraulic station, a nitrogen pressurization system, a control system, and a movable trolley. The nitrogen pressurization system is the core. Generally, when the nitrogen gas cylinder directly charges the energy storage gas with nitrogen, the maximum inflation (nitrogen) pressure is 13.5 MPa. If the pre-charged nitrogen pressure in the accumulator exceeds 1 ...
  • Nitrogen-charged car (nitrogen booster)
    CDZ-D1 nitrogen-filled vehicle (accumulator nitrogen-filled device) is composed of hydraulic system, pneumatic system and circuit system. When the pressure oil enters the booster cylinder through the electromagnetic reversing valve and pushes the piston, it enters the The nitrogen in the booster cylinder begins to pressurize and enters the accumulator (or the high-pressure vessel) through the check valve and the inflation tool. And through the limit switch ...
  • Nitrogen-filled trolley
    CDZs-D1 nitrogen-filled trolley is a special booster for hydraulic piston-type accumulators, hydraulic bladder-type accumulators, hydraulic diaphragm-type accumulators (including imported accumulators) and other high-pressure containers for charging and pressurizing nitrogen压 装置。 Pressure device. Name code: Nitrogen-filled trolley; Pressure level: 25, 35Mpa; Reversing method: Electromagnetic reversing type; Inflatable capacity ...
  • Accumulator capsule
    Accumulator capsules are also called accumulator skins. They are an important part of skin-type accumulators. They are usually made of rubber and are flexible. They are used to store compressed inert gas. Generally speaking, a certain pressure of nitrogen is injected into the capsule, and the outside of the capsule is filled with hydraulic oil. The capsule will be deformed as the hydraulic oil is squeezed, so the nitrogen is compressed to store ...
  • Accumulator safety ball valve
    Accumulator safety ball valve is mainly used for hydraulic bladder accumulator as an accumulator accessory for safe shut-off and unloading. It is installed between the accumulator and hydraulic system. The safety valve can maintain the pressure setting value in the system. When the pressure exceeds the set value, the safety valve opens to prevent the system from overloading. Especially accumulators installed in closed systems are more indispensable to prevent ...
  • Accumulator shut-off valve
    The accumulator cut-off valve is one of the accessories of the hydraulic one-capacity accumulator, which is mainly used for safety shut-off and unloading, and also provides convenience for maintenance and replacement. The main valve part structure is a hydraulic balanced cone valve type, which has the characteristics of small operating torque and reliable sealing. According to the connection method, the accumulator cut-off valve has straight-through, right-angle and three-way threaded connections ...
  • Accumulator control valve
    The accumulator control valve group is mainly installed between the accumulator and the hydraulic system. It consists of several parts such as shut-off valve, safety valve and unloading valve. It is mainly used to control the on-off, overflow and unloading of the accumulator. It has many features such as compact product structure, strong performance, flexible connection and easy operation. There are two types of unloading: manual and electromagnetic. Control valve block ...
  • Accumulator fixing assembly
    Correct installation and fixing are important conditions for the normal operation and proper functioning of the accumulator. When fixing the accumulator, do not subject the housing or joint to external pressure, especially in strong vibration, horizontal installation and 1 liter. Accumulators of the highest capacity must use fixed components. The entire set of accumulator installation components generally includes rear wall plates, clamps, brackets, rubber ...
  • 朝日 About Asahi More >>

    Asahi hydraulic accumulator

    Ningbo Asahi Hydraulics Co., Ltd. (formerly Fenghua Asahi Hydraulics Co., Ltd.) is located in Xikou Town, Fenghua District, Ningbo City, Zhejiang Province, a national 5A-level scenic tourist area. It was founded in 1978 and covers an area of 15,000 square meters. It is a professional design in China A modern enterprise that manufactures hydraulic accumulators and their supporting hydraulic components and complete hydraulic systems. It is a participating unit in the formulation of national standards for accumulators, a member unit of metallurgical equipment accessories of the China Iron and Steel Industry Association, and a member unit of the China Hydraulic Pneumatic Seals Industry Association. .

    证书 Certificate of honor More >>

    • Design License 1
    • Design License 2

    Honesty, excellence

    Domestic professional design and manufacture of accumulators and

    Its supporting hydraulic components and complete hydraulic system

    High-quality professional and technical personnel, complete manufacturing equipment, perfect detection methods.

    Trustworthy Enterprise in Product Quality

    Advanced Quality Management Enterprise

    National high-tech enterprise

    Plant equipment

    More >>
    • Closing process
    • Necking process
    • Heat treatment
    • Machining

    新闻更多>> Industry NewsMore >>

    Use and promotion of accumulators in wind power
    With the dwindling resources of petroleum and coal mines, many countries are actively exploring green and sustainable new energy sources. Wind power is clean and renewable, and it has a great potential among various new energy sources. Has many problems, such as wind energy has ...

    Address: No. 6, Zhongxing East Road, Xikou Town, Fenghua District, Ningbo City, Zhejiang Province. Fax: 0574-88847501 Tel: 0574-88850227 (Contact: Manager Zhu) Email: sales@yayeapp.com

    Copyright © 2006-2018 yayeapp.com All Rights Reserved Zhejiang B20091223009 Technical support: Hezhong Internet
    白小姐中特网必选一肖 足球彩票 白小姐四肖必选一肖 黄大仙精选资料网站 三肖精选10码 二四六精选资料大全