The diaphragm accumulator uses a sealed steel shell and a rubber diaphragm. The accumulator is divided into two parts, one end is filled with inert gas and the other is filled with liquid. To store and release the energy of a pressurized liquid.
Classification of diaphragm accumulators:
Diaphragm accumulators can be roughly divided into two types: welding type and screw type. Their basic structure and working principle are the same. The difference is that the welded structure uses welding to make the accumulator as a whole, while the threaded type uses the middle nut to connect the upper and lower shells of the accumulator into one.
Installation of diaphragm accumulators:
Diaphragm accumulators can be installed anywhere in the system, either horizontally or vertically. Diaphragm accumulators are designed to be fixed directly to the system with liquid-side threads, but in some poor environments (such as vibration, walking equipment), clamps are recommended.