万人炸金花

Welcome to the official website of Ningbo Asahi Hydraulic Co., Ltd.!
13736056877 Consulting Tel: 13736056877
0574-88850227
万人炸金花 > Industry News > Text

What should be paid attention to when removing the diaphragm accumulator?

Date: 2018-07-12 Author: Asahi hydraulic

隔膜式蓄能器.jpg

When the diaphragm accumulator is used for a long time, the internal pressure may be insufficient. The diaphragm accumulator needs to be disassembled and inflated. For disassembly, attention must be paid to these aspects.

1.Interface disconnection

In order to ensure safety, during the disassembly process, attention needs to be paid to closing the diaphragm-type accumulator, and during the subsequent cut-off process, to ensure the need for rapid, the connection must be completely closed, otherwise there may be internal gas leakage. Damage to the accumulator.

2. Stable placement

During the disassembly process, care must be taken to avoid hand shake and also to avoid bumps. During the installation process, care must be taken to handle it gently. Place it in a low temperature environment. Only after the internal pressure of the diaphragm accumulator stabilizes, You can perform subsequent operations to ensure safety.

3.Pressure measurement

The disassembly of the diaphragm type accumulator is to remove the diaphragm type accumulator with insufficient internal pressure. Therefore, it is necessary to measure the pressure and check whether the pressure is reduced. Compared with the original maximum pressure, avoid There are hidden dangers in energy storage.

Address: No. 6, Zhongxing East Road, Xikou Town, Fenghua District, Ningbo City, Zhejiang Province. Fax: 0574-88847501 Tel: 0574-88850227 (Contact: Manager Zhu) Email: sales@yayeapp.com

Copyright © 2006-2018 yayeapp.com All Rights Reserved Zhejiang B20091223009 Technical support: Hezhong Internet